Trinity Inspection Services

“Anyone else is just looking around.” ®

Infrared Thermography

     Trinity Inspection Services Ltd. has certified  Level I Thermographers on staff to assist with all your infrared needs. We use a state-of-the-art infrared camera and technology to ensure our customers get the best results possible, along with a detailed report.  Give us a call for all your thermal imaging needs. Our staff will be more than happy to help you.

Home Efficiency Inspection

A home efficiency inspection can be used to verify many items in construction giving hard copy documentation of the conditions inspected.  Ideal to conduct inspection immediately after completion of construction while home or new construction is still under warranty with Building Contractor. Used to pinpoint energy related problems caused by poor design, workmanship, or material failure.

  • Document and record for future reference areas of concern.
  • Identify air leakage energy losses.
  • Reduce heating and cooling energy losses.
  • Detect poor electrical connection, overloaded circuits and other electrical imbalances.
  • Locate missing, improperly installed, wet or damaged insulation in walls, floors, and ceilings.
  • Moisture can often lead to mold.

    •  
    Example: A single room with poor insulation requiring 4000 BTU/h (approx  $68/month electric) to maintain temperature during winter months might be reduce by 40% with proper insulation to 2400 BTU/hr ($41/month electric). This is a saving of $10 to $27 or more  per month for one room by locating, identifying and repairing energy loss problems.  It is typical that with a room or area having energy loss problems, the more expensive to operate electrical space heaters are used.  It is also common to adjust the temperature of the entire home/building to compensate for energy losses in heating or cooling.

     

    Flat Roof, Stucco, and Moisture Inspections   

    Wet or defective insulation within the roof or wall structure can be detected quickly and accurately.  This allows repairs to be done of the defective area, reducing costs by only replacing and repairing what is needed instead of the entire area.

  • Pinpoint water damaged areas quickly.
  • Eliminate replacement of the roof and wall areas that are good.
  • For non-destructive moisture evaluation.
  • Document problems.


    •  
     Process Monitoring / Inspections
     
    Detect problems with process equipment and processes.
    • Compressors
    • Pumps
    • Monitor production process temperature
    • Cold storage containers
    • Trace heating systems
    • Pipe blockages
    • Check Tank Levels
      •
     Mechanical Inspections
     
    Detect problems in fluid flow, insulation systems, rotating equipment and power transmission.
    • Locate misalignment of coupled equipment.
    • Minimize downtime.
    • Detect poor electrical connection, overloaded circuits and other electrical imbalances.
      •
     Electrical Inspections
     
    Detect poor connections, short circuits, overloads, and other imbalances.
    • Locate problems without interrupting service.
    • Minimize down time by locating problems quickly.
    • Reduce unscheduled power outages.
    • Substation Thermography
  • Sliding and bolted connections
  • Oil coolant flow
  • Control cabinet Heaters
  • Leaking current
  • Inductive Heating
  • * Look at hundreds of connections relatively quickly

    •  
     Preventive & Predictive Maintenance
     

    A large amount of equipment problems show uncharacteristic thermal signatures, before actual breakdown.  By detecting these "hot spots" with an infrared camera, you can prevent most unscheduled equipment shutdowns.

    Serving Pictou, Antigonish, Colchester, Cumberland, Guysborough Counties
     Office: (902) 396-4333 Cell: (902) 759-9881
     P.O.Box 668, Westville, NS, B0K 2A0
     rodney@trinityinspectionservices.com
     Toll Free: 1-877-955-433

     

    Copyright © 2007 Kaleidos. All Rights Reserved. Designed by Free CSS Templates.

    Privacy Policy | Terms of Use