Trinity Maintenance Solutions Ltd.
"providing Atlantic Canada with solutions that work"
|
|
Trinity Maintenance Solutions Ltd. "providing Atlantic Canada with solutions that work" |
|
Infrared Thermography
Trinity Maintenance Solutions Ltd. has certified Level I Thermographers on staff to assist will all your infrared needs. We use a state-of-the-art infrared camera and technology to ensure our customers get the best results possible, along with a detailed report. Give us a call for all your thermal imaging needs. Our staff will be more than happy to help you.
A home efficiency inspection can be used to verify many items in
construction giving hard copy documentation of the conditions
inspected. Ideal to conduct inspection immediately after
completion of construction while home or new construction is
still under warranty with Building Contractor. Used to pinpoint
energy related problems caused by poor design, workmanship, or
material failure.
-
Document and record for future reference areas of concern.
-
Identify air leakage energy losses.
-
Reduce heating and cooling energy losses.
-
Detect poor electrical connection, overloaded circuits and other
electrical imbalances.
-
Locate missing, improperly installed, wet or damaged insulation
in walls, floors, and ceilings. Moisture can often lead to mold.
Example: A single room with poor insulation requiring 4000 BTU/h
(approx $68/month electric) to maintain temperature during
winter months might be reduce by 40% with proper insulation to
2400 BTU/hr ($41/month electric). This is a saving of $10 to $27
or more per month for one room by locating, identifying and
repairing energy loss problems. It is typical that with a room
or area having energy loss problems, the more expensive to
operate electrical space heaters are used. It is also common to
adjust the temperature of the entire home/building to compensate
for energy losses in heating or cooling.
 Flat
Roof, Stucco, and Moisture Inspections
Wet or defective insulation within the roof or wall
structure can be detected quickly and accurately. This
allows repairs to be done of the defective area, reducing
costs by only replacing and repairing what is needed instead
of the entire area.
-
Pinpoint water damaged areas quickly.
-
Eliminate replacement of the roof and wall areas that are
good.
-
For non-destructive moisture evaluation.
-
Document problems.
Process
Monitoring / Inspections
Detect problems with process equipment and processes.
-
Compressors
-
Pumps
-
Monitor production process temperature
-
Cold storage containers
-
Trace heating systems
-
Pipe blockages
-Check
Tank Levels
Mechanical
Inspections
Detect problems in fluid flow, insulation systems, rotating
equipment and power transmission.
-Locate
misalignment of coupled equipment.
-Minimize
downtime.
-Detect
poor electrical connection, overloaded circuits and other
electrical imbalances.
Electrical
Inspections
Detect poor connections, short circuits, overloads, and
other imbalances.
-
Locate problems without interrupting service.
-
Minimize down time by locating problems quickly.
-
Reduce unscheduled power outages.
-
Substation Thermography
Sliding and bolted connections
Oil coolant flow
Control cabinet Heaters
Leaking current
Inductive Heating
* Look at hundreds of connections relatively quickly
Preventive
& Predictive Maintenance
A large amount of equipment problems show uncharacteristic
thermal signatures, before actual breakdown. By detecting
these "hot spots" with an infrared camera, you can prevent
most unscheduled equipment shutdowns.
|
         |
© 2007 Trinity Maintenance Solutions Ltd.
Website Design by Rodney Misener
